so
Products
Specializing in CNC roll processing machine tools
/
/
/
CK8465 CNC Roll Lathe

Product Categories

CK8465 CNC Roll Lathe
Number of views:
1000

CK8465 CNC Roll Lathe

The machine tool is a special machine tool for rolls, which is mainly used for steel mills to process the hole pattern of the roll body. A special machine tool is used to process the hole pattern and repair the hole pattern for various rolls with a diameter of 150 ~ Ф650mm. It can also perform rough machining on the outer cylindrical surface of the roll and some other shaft parts.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Product description
Parameters

1. The main purpose and basic composition of the machine tool

1.1 Main uses

The machine tool is a special machine tool for rolls, which is mainly used for steel mills to process the hole pattern of the roll body. A special machine tool is used to process the hole pattern and repair the hole pattern for various rolls with a diameter of 150 ~ Ф650mm. It can also perform rough machining on the outer cylindrical surface of the roll and some other shaft parts.

1.2 The basic composition of the machine tool:

The machine tool is composed of main components such as bed, headstock, tailstock, tool holder, numerical control system, electric control cabinet and so on.

 

2. The main specifications of the machine tool

2.1 Main parameters

2.1.1 Maximum workpiece diameter ----------------------------- 650mm

2.1.2 Minimum machining diameter ------------- 150mm

2.1.3 Center height ----------------------------- 400mm

2.1.4 Maximum workpiece length ------------- 3000mm

2.1.5 Maximum workpiece weight ----------------------------- 5t

2.1.6 Maximum torque of faceplate ----------------------------- 20KN.m

2.1.7 Single tool holder cutting force ----------------------------- 30KN

2.1.8 Top cone angle ----------------------------- 60 ° or 75 °

2.1.9 Knife square section size ----------------------------- 40 × 40mm

2.2 Main drive parameters

2.2.1 Spindle speed series ----------------------------- Stepless debugging

2.2.2 Spindle speed range ----------------------------- 2 ~ 240r / min

2.2.3 Faceplate diameter ------------- 650mm

2.2.4 Spindle taper hole size ----------------------------- MS8 #

2.2.5 Faceplate clamping diameter ----------------------------- 150 ~ 650mm

2.3 Feed drive parameters

2.3.1 Feeding level ----------------------------- Servo motor stepless control

2.3.2 Longitudinal feed range ----------------------------- 0 ~ 2000mm / min

2.3.3 Range of infeed amount ----------------------------- 0 ~ 2000mm / min

2.3.4 Longitudinal rapid movement speed ----------------------------- 4000mm / min

2.3.5 Horizontal fast moving speed ----------------------------- 3000mm / min

2.4 Tailstock parameters

2.4.1 Tailstock sleeve movement ----------------------------- 280mm

2.4.2 Tailstock sleeve diameter ----------------------------- 200mm

2.4.3 Fast moving speed of tailstock ----------------------------- 800mm

2.4.4 Size of taper hole of tailstock spindle ----------------------------- MS6 #

2.5 Motor parameters

2.5.1 Main motor power ----------------------------- 30KW eight-level

2.5.2 Vertical and horizontal feed mobile servo motor power ----------------------------- 3.5KW

2.5.3 Tailstock fast moving motor power ----------------------------- 0.75KW

2.5.4 Headstock box lube pump motor power ----------------------------- 0.37KW

2.6 Other

2.6.1 Machine outline dimensions (length × width × height) ----------------------------- 6480 × 2100 × 1920mm

2.6.2 Machine weight ----------------------------- 15.0t

 

3. Introduction to the main structure of the machine tool

3.1 Bed

The bed has four guide rails, a bedside box is installed at the left end of the bed, the oil sump is located outside the bed body, which is convenient for maintenance, and the oil sump is used for lubrication of the headboard. The knife holder, tailstock and center frame are installed on the bed and can move longitudinally along the guide rails.

There is a chip removal channel between each rail of the bed, and iron chips can be discharged to the ground behind through the chip removal hole for removal.

3.2 Headboard

The headstock is a closed box, which is equipped with all the main transmission mechanisms from the main motor to the main shaft. The main motor is the main shaft servo motor, and the stepless speed change of the pure gear transmission makes the main shaft obtain the speed range of 2 ~ 240r / min.

The power of the main drive is introduced into the headstock through a pulley with an AC asynchronous motor with a power of 30KW. All the drive shafts are installed on rolling bearings, and the main shaft is mounted on a double row cylindrical roller bearing with high precision and adjustable radial clearance To make the spindle rotate smoothly and with high precision.

Behind the headstock is equipped with a device for lubricating all transmission mechanisms, and a gear oil pump driven by a separate motor supplies oil. In order to ensure that the lubrication conditions of the front and rear bearings of the main shaft are good, not only a separate oil pipe with sufficient oil quantity is used for lubrication, but also a mercury switch-type protection device is used to protect the oil quantity.

3.3 Slide box

Slider box is a closed box, fixed under the front of the large knife holder, which is equipped with a servo feed mechanism and ball screw drive. The function of the slider box is to make the knife holder obtain various movements.

3.4 Tool holder

The machine tool holder is a cast steel overall tool holder. Its power is equipped with a servo feed mechanism and ball screw drive, which drives the horizontal slide plate to make lateral movement. A knife pad is installed at the front end of the horizontal slide plate, which is used for placing the knife top.

3.5 Tailstock

The tailstock adopts an integral part. The upper body of the tailstock has a main shaft component and a sleeve moving mechanism, and the lower body of the tailstock is equipped with a fast moving mechanism and a tailstock anti-retraction mechanism. The tailstock fast-moving mechanism is dragged by the motor on the rear side of the reduction gearbox, passes through a pair of spur gears and worm gears, and is transmitted to the final link, the gear rack and rack, to make the tailstock move quickly. The tailstock anti-return mechanism is provided with a manipulating handle at the tail end of the tailstock, which is used to operate the half-fishtail-shaped anti-return claw. When the tailstock is fixed, the manipulator handle can be inserted into the cast teeth on the side of the bed.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Next
  • Service
  • Hotline 139-1243-6252
  • Top
Hengkong

Hengkong—Specializing in CNC roll processing machine tools

Copyright ©  2020 Nantong Hengkong Machinery Co., Ltd.
苏ICP备20021419号 
     Powered by 300.cn

Nantong Hengkong Machinery Co., Ltd.

Address: Group 5, Qiaodong Village, Qinzao Street, Gangzha District, Nantong City

Contact: Yang Yongjian  Mobile: 86-13912436252

    Yifeng  Mobile: 86-13962977985

Phone: 86-513-81066680
E-mail: nthkjx@126.com

QR

Scan QR code